Coreweld Mild & Low Alloy Metal Cored Wires
These Coreweld products, designed for carbon steel welding, provide smooth spray transfer with minimal fume, spatter, and slag.
Coreweld 110 is a metal cored electrode designed for single and multipass welding of high strength low alloy steels, such as T-1, HY-80, and HY-100.
Coreweld 70 is a tubular wire containing ingredients primarily comprised of metal powder along with additional arc stabilizers and alloying elements.
Coreweld 77-HS is a metal-cored wire designed to run at faster travel speeds, higher deposition rates and leave very few silica islands.
Coreweld 80-D2 is a metal cored wire equivalent to ER80S-D2 solid wire.
Coreweld 80C-Ni1 is a metal cored wire for application where good low temperature impact toughness or weathering characteristics are required. It operates over a broad range of parameters, produces a smooth, spray transfer with minimal fume and spatter and is tolerant of light rust and millscale. The shielding gas used should be Ar 75-92% / 25-8% CO2.
Coreweld 88HS-Ni1 is recommended primarily for robotic or mechanized high speed welding of sheet steel. Welding speeds up to 90 ipm are possible when welding vertical down. The low slag level of Coreweld 88HS-Ni1 minimizes post weld clean up. For this reason, Coreweld 88HS-Ni1 gives special advantage in applications where post weld coating or painting is specified.
Coreweld C6 was developed and "fine-tuned" especially for hand-held, automatic and robotic welding in the automotive industry, as well as rail car manufacturing, structural welding and other similar applications.
Coreweld W is a metal cored wire designed for single or multipass welding on weathering grade steels.