General
Description
Joint
Design &
Preparation
Making the
Weld
Operating
Hints &
Procedures
Current, Voltage
and Speed
Granular
Joint Cleaning
Fit-Up of Joints
Material
Welding Wire
and Current
Current Circuit
Fillet Welding
Circumferential
Seams
Weld Faults
Index
Weld Costs
Conditions
Tables
Multipass
Welding
4 FIG. 29 - Effect of Varying the Welding Speed 14.4 INCHES PER MINUTE 40 Volts 1200 Amperes WELDING SPEED SQUARE GROOVE BUTTJOINT 1/2-in. Plate LOW CORRECT 21 INCHES PER MINUTE 29 Volts 500  Amperes 30 INCHES PER MINUTE 29 Volts  500 Amperes HIGH 39 INCHES PER MINUTE 29 Volts  500 Amperes Result: Too little wire deposited per unit length of weld. Both welds undercut. Bottom weld has insufficient reinforcement. Result: Welds are satisfactory in all respects. Result: Too much wire deposited per unit length of weld. Fusion zone too wide and poorly shaped. 45o SINGLE-VEE GROOVE BUTT JOINT 1-1/2 in. Plate 8.75 INCHES PER MINUTE 40 Volts 1200 Amperes 12.5 INCHES PER MINUTE 40 Volts 1200 Amperes