32 Typical
Undiluted Typical Mechanical
Weld Metal Analysis Type
Properties %
wt Specifications
75/25
75/25
(CO2) Shield-Bright
308L AWS A5.22
Tensile Strength C
0.032 (0.034)
ASME SFA 5.22 86,000
psi (593 MPa) Mn
1.2 (1.2)
Class Yield
Strength Si 0.8
(0. 7) E308LT1-1/T1-4
58,500 psi (403 MPa) Cr
19.5 (19.2)
MIL-Conf. A5.22 %
Elongation in 2" (51 mm) Ni
10.0 (10.0)
CWB, TUV 45
ABS-A5.22 FN
5 (5)
For welding types 301, 302, 304, 304L, 308,
and 308L. May be used for welding types 321 and 347 if service temperature does
not exceed 600°F (315°C). Low carbon
content minimizes carbide precipitation. Cryo-Shield
308L AWS A5.22
Tensile Strength C
0.03 ASME
SFA 5.22 80,000 psi (552 MPa)
Mn 1.2
Class Yield
Strength Si 0.7
E308LT1-4 65,000
psi (449 MPa) Cr
18.8 %
Elongation in 2" (51 mm) Ni
10.7 45
FN 3
CVN 27 ft.-lbs. (38 J) @-320°F (-196°C)
Lateral Expansion 22 mils (0.55 mm) @-320°F
(-196°C) Cryo-Shield 308L
is an all-position wire adaptable to a variety of shop and field erection applications.
The use of argon/CO2 gas shielding
is recommended for maximum toughness. Designed for cryogenic applications where
good weld metal toughness is required.
Applications include cryogenic fabrication and repair. Recommended
Welding Parameters page 39 Additional
Stainless Cored Wires listed on page 49
